Tubing and hoses
Tube polyuréthane calibré
Tube souple en polyuréthane calibré, tolérant au pliage et à l'abrasion, adapté aux raccords instantanés et aux mouvements répétés.
View the product → Pneumatique
Tubing and hoses
Polyurethane, polyamide and PTFE tubing, calibrated, coiled and antistatic tubing, multi-ply rubber workshop tubing. Cut to length, with fittings or quick couplings assembled at our Riom workshop.
Identify a component
Cannot find your part number? Describe the part, add photos, and a technician will identify it.
9 products
Tubing and hoses
Tube polyamide
Tube rigide en polyamide, bonne tenue en température et aux hydrocarbures, destiné aux lignes fixes et aux circuits de freinage.
View the product → Tubing and hoses
Tube PTFE
Tube en PTFE pour hautes températures et fluides agressifs, chimiquement inerte et à très faible coefficient de frottement.
View the product → Tubing and hoses
Tube spiralé pneumatique
Tube polyuréthane enroulé en spirale qui se rétracte après usage, pour alimenter un outil de poste sans laisser traîner de longueur au sol.
View the product → Tubing and hoses
Flexible d'atelier équipé
Tuyau d'air comprimé prêt à l'emploi, coupé à la longueur et muni d'un coupleur et d'un embout mâle du profil de votre atelier.
View the product → Tubing and hoses
Tube pneumatique antistatique
Tube dont la matière dissipe les charges électrostatiques, destiné aux ambiances poussiéreuses, aux poudres et aux atmosphères explosibles.
View the product → Tubing and hoses
Tuyau caoutchouc multi-nappes
Tuyau à âme caoutchouc et plusieurs nappes textiles, qui encaisse l'écrasement et l'abrasion sur les liaisons d'air exposées.
View the product → Tubing and hoses
Gaine spiralée de protection
Gaine plastique enroulée en spirale qui regroupe et protège tubes et câbles contre l'abrasion, les arêtes vives et les projections.
View the product → Tubing and hoses
Tuyau polyuréthane
Tuyau polyuréthane souple pour air comprimé, tolérant au pliage et à l'abrasion, en couronne, en spirale ou à la coupe.
View the product →Pneumatic tubing is chosen on four points: the material, the outside diameter / inside diameter pairing, the working pressure at the service temperature, and the method of connection. Unlike hydraulics, it is the outside diameter that decides the fitting, because push-in fittings grip the tubing on its outer wall.
Polyurethane is the general-purpose tubing: supple, tolerant of bending, well suited to repeated movement. Polyamide is stiffer, stands up better to temperature and to hydrocarbons, and remains the reference for fixed lines and braking circuits. PTFE covers high temperatures and aggressive fluids. Textile-reinforced rubber tubing is used for workshop and site connections, where abrasion and crushing on the ground are the real enemies.
- The working pressure of plastic tubing is quoted at 20 °C: it drops away noticeably as the temperature rises.
- A clean, square cut is what makes a push-in fitting seal. Tubing cut with pliers goes oval and leaks.
- Respect the minimum bend radius: tubing bent to a sharp angle kinks and cracks.
We cut your tubing to length, assemble the fittings and the quick couplings, and replace workshop hoses on site or on the bench.
Need advice on this range?
Request a quote